Methacrylate crack sealer

The use of T on concrete structures reduces chloride permeability thus protecting it from further deterioration. T methacrylate concrete sealer can be used for crack sealing and filling on numerous types of concrete structures:. For more information, please refer to the product sheet and the technical data sheet. Transpo Industries is a transportation infrastructure safety and materials company, founded in Its executive management has over years of collective industry expertise and has been working together for decades.

Contact Us Regional Managers. Methacrylate Concrete Sealer. Surfaces to be sealed should be lightly brush blast shot blasted to remove laitance and expose surface cracks. The amount of hardener must be adjusted to the respective surface temperature see table below. Product Hardener by volume unless confirmed with jobsite testing.

Consult with Epoxy. Inspect underside of elevated decks for evidence of full depth cracks that may require additional treatment to prevent draining of resin.

Inspect the underside of elevated decks for evidence o full depth cracks that may require additional treatment to prevent draining of the resin. Do not allow to form puddles. Coverage rate will vary depending on the porosity of the concrete and quantity of cracks. Apply subsequent applications of resin only after the previous application is completely hardened. There should be very little resin film on the surface upon completion.

Surface resin will wear over time, however the filled cracks and porosity will remain sealed. Clean tools and equipment with lacquer thinner or MEK. Consult Material Safety Data Sheet for safety and health precautions.

Will vary depending on porosity of substrate and quantity of cracks. Two coats may be necessary on very porous substrates.